Tdk TREK Micro Wireless - Battery replacement instruct Uživatelský manuál stáhnout pdf

TREK Micro Battery Replacement Instructions

Caution: Disconnect the micro USB power connection and place the power switch on

the right side of the unit in the OFF position before beginning the replacement.

1. Using a 1.5 mm. hex wrench, remove the four

screws holding the bottom plate.

2. With a tweezers or needle nosed pliers,

carefully lift the bottom plate.

3. Lift the cable and connector.

1 2 3

Strany 1

TREK Micro Battery Replacement Instructions Caution: Disconnect the micro USB power connection and place the power switch on the right side of the u

4. With a small screw driver or other tool, lift the battery assembly. 5. Unplug the connector. 6. Remove the old battery and insert the

8. Reinstall the four retaining screws. Proper disposal of the old battery is essential from an environmental and safety point of view. Pleas

Žádné komentáře

Tdk TREK Micro Wireless - Battery replacement instruct Uživatelský manuál